Installing a Modern Shower Unit: Key Steps for Homeowners

Installing a Modern Shower Unit: Key Steps for Homeowners

Blog Article

Schedule A Service

Just how do you really feel about How to Install a Freestand?

A successful shower installation needs careful preparation as well as a lot of job. For the most part, you will need to do three types of jobs: mounting wall surfaces, setting up the plumbing, as well as finishing walls.

Prep work

Firstly, you must select the sort of shower that you wish to install. It is very important to establish whether the chosen shower is capable of handling particular systems and can manage a safe degree of water via the central heating boiler. A lot of shower devices nowadays are designed to be adaptable to different water stress (such as stored hot water as well as cool mains).
It is likewise essential to take into consideration the water pressure and the preparation of the piping and water drainage for the shower

Different Types of Shower Units

Push-on Mixer: The tube and also spray parts of the push-on mixer shower system can be connected to the bathroom tap based on your need, as well as the water temperature can be changed through the faucets. Push-on mixers are cheap as well as extremely straightforward to set up. However, although the pipe connection is easy, it is conveniently removed. Additionally, it is troublesome to readjust the temperature.

Bath/Shower Mixer: The pipe and spray of this sort of shower are integrated with a bathroom mixer tap, as well as the temperature can be changed with the bath taps. It is an extremely economical alternative and also no additional plumbing is involved. Nonetheless, the bath/shower mixers likewise suffer from inconvenient temperature level control alternatives.

Manual Mixer: The hose pipe and spray of a manual mixer shower unit belong of the wall unit and also the cold and hot water materials are connected to a solitary valve The temperature level and stress of the water are managed through either one or a selection of knobs (in more pricey showers). Although temperature control is a lot easier in manual mixer kinds, they are more pricey than the previously mentioned mixers. They likewise require extra plumbing of hot and cold water supply pipelines.

Thermostatic Mixer: The hose as well as spray of this shower kind are a part of the wall system and also the hot and cold water products are connected to a single valve below also. It is complete with a built-in stabiliser to self-adjust the water temperature level and also to stop it from becoming as well warm. Among the biggest advantages of a thermostatic mixer shower kind consists of practical temperature level control. However, it is one of the most costly of the different mixer choices.

Power Shower: A power shower is a solitary unit having a powerful electric pump that can modifying both the water stress and also temperature level. This type of shower can be fitted if there is water supply from a cold water tank and a hot water cyndrical tube. A power shower makes the adjustment of both stress and temperature very easy. On the other hand, it disagrees for water heated straight by the shower or where the water is supplied by a mix central heating boiler under mains stress.

Electric Shower: An electrical shower is plumbed into a mains cold water supply and also it warms the water electrically. It is essential to note that for this shower kind to be set up, the mains stress needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The device permits the temperature and also pressure to be readjusted through a handle. Versions with temperature stabilisers are much better as they continue to be untouched by various other faucets somewhere else in use within the home. A major downside of electrical showers is that the control knob only enables the option of high temperatures at less stress, or lower temperature levels at a greater pressure. This is bothersome in the winter when the spray is commonly weak and also the keys water is cooler. Nonetheless, this trouble is dealt with in some models which are available with a winter/summer setup.

Technique

Depending upon the sort of shower you want to install, the shower head have to either be fitted in order to prevent its contact with the water in the bath below or the base tray, or it must have a check shutoff.
Prior to starting, it is advisable to note the settings of the shower head and control, and also to prepare the pipe-work entailed. Furthermore, the water drainage system to remove the drainage will certainly need to be prepared. Both settings of the cable television route and also the shower switch will certainly also require to be taken into consideration if an instantaneous or electrical shower system is being installed.
Make use of the direction overview offered with the shower device to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is very important to remove the supply of water. In order to shield the pipes, they must be offered a water-proof covering and likewise fitted with isolating shutoffs. The pipes can then be hidden right into the wall surface and also smudged over to neaten the general appearance.
Fit the base tray, shower head, as well as fittings.
Connect the major shower control to the pipelines that will be supplying the water (This might call for a female screw thread adapter).
Reconnect the water supply and also test the pipelines for any kind of leaks, as some might need tightening.
If you are mounting an electric shower, keep in mind to turn off the power supply before making any electric connections. As soon as these connections have been made (there should be advice within the instruction manual), the power supply can be changed back on.

Readjusting Water Stress to Fit Your Shower

The cold water tank can be raised to a better height (in some cases as low as 150mm (6inches)) by fitting a strong wood support underneath it - possibly made up of struts and blockboards. If you pick this choice, the major as well as distribution pipelines will likewise need to be increased to satisfy the brand-new height of the tank.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is picked, it must be connected into the power supply in order to run.

Piping and also Water drainage

It is best to make use of 15mm size supply pipelines, and make the runs to the shower as short as well as straight as feasible so as to maintain maximum pressure and reduce heat loss. Additionally, by reducing using arm joints for pipeline corners, you can lower the resistance in the circulation of the water system. You can achieve this by flexing the pipelines rather.

Many Common Blunders

Breaking or disregarding regional code limitations.

Using pipelines that are as well tiny.

Connecting copper to galvanized without utilizing a brass or dielectric fitting in between the two.

Not making use of tape or pipe substance at threaded joints.

Not leveling your components when mounting them.

Not installing an air void filling for components.

Cutting supply stub outs as well short to set up the shutoff valves onto after the completed wall surface is in area.

Not effectively lining up tubing right into installations or stop valves. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will create a leak.).

When transforming the water back on in your house, always run the outside pipe valve or flush your bathrooms to hemorrhage dust as well as air from the lines. This debris can create problems in your sink faucets and other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I ran across that blog entry on How to Install a Shower Enclosure when doing a search on the web. For those who liked our blog entry please make sure you remember to share it. I thank you for reading our article about How to Install a Freestand.

We've got answers!

Report this page